Description
P1 Interface Bridge
P1IB is shipped complete, including cable – ready to be plugged into your power meter.
Features
- Fully configurable via web UI.
- WiFi access point
- DHCP/static ip
- MQTT settings
- And lots more…
- Dashboard in web UI with realtime updated graphs for the majority of measurement points from the power meter.
- Supports both protocols that the Swedish meters use at this moment:
- DLMS/COSEM AXDR/HDLC Mode E (Aidon).
- DLMS/COSEM ASCII Mode D (the other ones).
- MQTT support.
- Automatic sensor registration for Home Assistant (MQTT Auto Discovery).
- Supports OTA firmware update via web ui (official builds fetched from p1ib github repo).
- Webservice with JSON response of meter data.
- Reduced data mode
- Logging/debug through UDP to a remote computer and/or USB serial.
- P1IB does not require any internet connection (with the exception for over-the-air firmware updates).
More information and screenshots @ https://remne.tech/p1ib/
Note. P1IB does not work on older Kamstrup OMNIPOWER meters, as they are not DMSR compatible. All other meters with P1-port (RJ12) deployed in Sweden are supported, including Kamstrup OMNIA.
